- Detail
- Parameters
- Review
KLTHFH-1000C ( Quotation)
Description | Model | Quantity | ||
1 | CNC ring seam welding machine | AC 220V 50 HZ | 1 set | |
The maximum effective welding length:1M | ||||
Clamping diameter range:Φ612mm | ||||
Headstock center height:600mm | ||||
Headstock: DC step motor; RV reducer | ||||
Welding torch pneumatic drop stroke: 100mm | ||||
Controller: CNC 2-axis controller | ||||
2 | Weld swing device | welding gun swings left and right, swing frequency, left and right swing stay time, etc | 1 set | |
3 | Welding power supply | Model: OTC-CPVE400 MIG/MAG/CO2 Contain: Wire feeder , Control cable | 1 set | |
4 | Welding torch | 500A water-cooled Straight shank welding torch | 1 set | |
5 | Model:WL-20 Power supply rated voltage: 1 × 220V 50Hz Rated load: 205 W | 1 set | ||
6 | Conductive tip | Φ=1.0mm/Φ=1.2mm, 1 row = 10 pieces | 10 row | |
7 | Welding torch cover | 500A water-cooled welding torch; 1 row = 5 pieces | 10 row | |
8 | Port fees | Container port costs | 1set | |
FOB Total(USD): | ||||
Quotation description: | ||||
1, This offer is valid for 10 days from the date of quotation; | ||||
2, Delivery cycle:30 working days after signing; delivery mode: Port of Tianjin ,China; | ||||
3, Payment: full payment, delivery;The freight includes arrival at port; | ||||
4, Payment method： T/T ,Prepay 40%, pay 60% within 5 days before delivery ; | ||||
5, This price does not include overseas engineering installation services, such as installation services, the specific price in communication | ||||
Custom machine requirements
The machine (KLTHFH-1000C) is mainly used forAutomatic circumferential seam welding of products such as end caps or water tanks. The length of the workpiece is ≤1M, the thickness of the weldment is 1-6 mm, and the welded parts are carbon steel or stainless steel.
Main function description of the machine
1.1Workload loading and unloading method: In the early stage, the left and right end caps are spot welded first; the operator hoisting the workpiece on the pneumatic bracket of the machine, and using the tailstock pneumatic topping seat to fix the workpiece in the left and right positioning clamping fixture. Manually open the torch cylinder lowering switch, adjust the position of the welding torch, and press the start button to perform the circumferential seam welding of the end cap of the head.
1.2 Welding method: The workpiece is in the fixture, and the workpiece is rotated by the power of the spindle box stepping motor and the RV reducer. This machine adopts MIG gas protection welding process, and the welding power load rate is 100%. The 500A water-cooled welding torch and the associated water-cooled water tank enable long-term welding of the end caps. Therefore, we choose the OTC-CPVE400 model with CO2 / MAG / MIG function, suitable for the customer-defined material stainless steel 316.
3. Workpiece precision requirement（1）The surface of the work shall not affect the quality of welding oil, rust, moisture；
（2）Must not affect the positioning of burrs, etc.；
（3）The clearance shall be no more than 1mm；
（4）The consistency error of the same weld group is less than 0.5m。
KLTHFH-1000C CNC end ring seam welder is mainly made up of machine bed, left and right sliding beam, rotating spindle box, special fixture, pneumatic top tailstock, pneumatic support bracket, upper and lower electric slide table, upper and lower air slide table, front and rear manual slide table , welding torch three-dimensional adjustment gripper, welding gun swing mechanism, water cooling torch, wire feeder, CNC control system, OTC-CPVE400 (MIG / MAG / CO2) welding power supply, cooling water tank, safety protection door, cable Drag chains ,carbon dioxide gas cylinder, etc.
1、Machine bed
2、Left and right sliding beam
3、Rotating spindle box
4、Special fixture
5、Pneumatic top tailstock
6、Pneumatic support bracket
7、Upper and lower electric slide table
8、Upper and lower air slide table
9、Front and rear manual slide table
10、Welding torch three-dimensional adjustment gripper
11、Welding gun swing mechanism
12、Water cooling torch
13、Wire feeder
14、CNC control system
15、OTC-CPVE400 welding power supply, cooling water tank
16、Safety protection door
17、Cable Drag chains
18、Carbon dioxide gas cylinder
2. KLTHFH-1000C CNC end ring seam welder MIG welder layout: (picture is for reference only)
The main technical parameters
Model | KLTHFH-1000C | |
1 | Effective welding length | ≤1m |
2 | Welding speed | 200～800 mm/min |
3 | Welding power supply | OTC- CPVE400 |
4 | Cooling water tank | WL-20 |
5 | Number of welding guns | 1 set |
