Panasonic YD350/500GL5

Collection

￥0.00

Collection

Detail

Parameters

Review

Applications

Fully digitally controlled welding power source 350/500GL5（Load rate 60%）

GL5 offers theexcellent welding performance for mild steel and stainless steel, achieving thelight-spatter short-circuit transfer at low current. As standard configuration,the root welding function is ideal for the root pass and large gap welding. Theextendable Deepen deep penetration function can be widely applied to the thickplate deep penetration and root pass welding. A variety of optional processsoftware packages expend the machine to meet the strict requirements of specialmaterials and processes. It's also possible to customize and develop specialprocess software just for you . The built-in IoT module and analogcommunication interface as well as the expandable digital interface enable GL5to work with the automatic special purpose machine and robot.

The mainwelding methods:CO2, MAG, MAGpulse, stainless steel MIG, stainless steel MIG pulse ‍

1. IBC (IniArcand BBK Control )

Arc-starting and ball-cutting control technology, the arc-ignition adopts asynchronous surface acceleration control, dynamically adjusts the arc-ignition energy, can quickly establish and stabilize the molten pool, and improve the success rate of arc-starting; the burn-back adopts the controllable dynamic ball cutting technology to improve the meltingThe uniformity of the ball size; at the same time, the shortening of the arc ignition and the reburning time can accelerate the welding tempo and improve the production efficiency.

2. ALC (Arc Length Consistence )

Pulsed arc length control, dynamically adjusts the pulse parameters during the welding process to ensure that the arc length is constant in the event of external disturbances (such as dry elongation changes), while improving the dynamic characteristics and adaptability of the arc; uniform pulse frequencyAdjustment makes the welding sound softer, which greatly reduces the noise generated by welding; strictly controls the transition form of one pulse and one drop, improves the consistency of droplet drop, improves weld quality and reduces welding defects.

Dry elongation changes, the arc length is constant

Dry extension welding (variation range 10-30mm)

3. Deepen (Deep-penetratingArc )

The deep through-arc is through a series of changes in the shape of the arc, obtaining the arc resonance mode while increasing the current density, making the arc penetrating and achieving a large penetration depth.The free-driving of the penetration depth can be achieved by stepless adjustment of the arc energy distribution of the deep arc.

Deepen deep arc T-shaped fillet weld - single-sided welding double-sided penetration

4. Root

Root is a short-circuit transition method with low heat input.Through fine waveform control, the arc is more stable, the heat input is lower, and the droplet transfer is more uniform, thus improving the arc bridge capability, especially suitable for large gap welding, beveling and bottom welding.When the bottom welding is performed, the amount of clearing work is greatly reduced, even without clearing the roots, and the back is transparent and smooth, and the vertical and vertical welding can reduce the swing or even the swing.

5 . HL-Pulse

The HL-Pulse pulse, also called double pulse, superimposes low frequency pulses on high frequency pulses, fast welding at high pulses and low weld heat input at low pulses.The heat input is regulated by an alternating stepped output of energy, and a fish scale-like weld can be obtained without swinging.Commonly used for sheet metal welding of aluminum and stainless steel.

6. S-Pulse (SUS pulse)

The S-Pulse pulse contains a variety of stainless steel weld data.For the difference in welding characteristics between the three-series stainless steel and the four-series stainless steel, special welding data can be automatically obtained, so that the welding arc can reach a stable state and a smooth droplet transfer can be obtained, ensuring a low spatter and a good weld.forming.

Power supply model	YD-350GL5	YD-500GL5
Product Serial Number	YD-350GL5HGE	YD-500GL5HGE
Input voltage	AC 3*380V 50/60 Hz
Rated input capacity	17.6 kVA	29.9KVA
Rated input power	13.5 kW	23.9 kW
Rated output current	Pulse no：DC 350 A Pulse has：DC 350 A	Pulse no：DC 500 A Pulse has：DC 400 A
Rated output voltage	31.5 V	39 V
No-load voltage	80 V	80V
Output current range	Pulse no：DC 40~430 A Pulse has：DC 40~350 A	Pulse no：DC 60~500 A Pulse has：DC 60~400 A
Output voltage range	Pulse no：16~35.5 V Pulse has：16~31.5 V(resistive load output capability)	Pulse no：17~39 V Pulse has：17~34 V(resistive load output capability)
Rated load duration	60%
control method	IGBT inverter control
Memory	100 channel callable weld specification storage
Specification adjustment	Separate/unary
Applicable wire type	Drug core / solid core
Applicable wire	Solid core0.8/1.0/1.2/14/1.6mm
	Core steel 1.2/1.4/1.6mm Core stainless steel 1.2 mm
Timing	Welding / Welding - Arcing / Initial - Welding - Arcing / Spot Welding
Protective gas	CO2:100%
	Ar:80%,CO2:20%
	Ar:98%,O2:2%
Gas inspection time	60s (longest gas inspection time)
Advance air supply time	0–5.0s continuous adjustment (0.1s increments)
Lag out time	0–5.0s continuous adjustment (0.1s increments)
Spot welding time	Continuous adjustment of 0.3–10.0s (0.1s increments)
Insulation grade	Main transformer 155 ° C (reactor 200 ° C)
Protection level	IP23S
cooling method	Forced air cooling
Dimensions (length × width × height)	682×380×612 mm	762×380×612 mm
weight	68 kg	75 kg