- Detail
- Parameters
- Review
KLTW1400XZ8-YD350GL5 ( List of goods)
Description | Model | Quantity | |
1 | 6 Axis welding Robot | Model：KLTW1400 AC220 V ,50/60HZ R=1441.5mm，Load=6kg Control cabinet: TRC3C-B06 Anti-collision welding torch: APG35Y Cable Line: Standard configuration | 1 set |
External axis servo motor | Add 7axis and 8 axis; | 2 sets | |
Robot extension cable | Robot extension cable (8m); And extension of external axis servo motor cable | 2sets | |
2 | MIG/MAG/CO2 Welding Power | Model: Panasonic YD-350GL5 Load rate: 60% ;MIG/MAG/CO2; Robot special wire feeder | 1 set |
3 | Servo head and tail positioner | Load≤250kg, Linked with the robot, Platform size 2000mm*900mm ;Precision RV reducer, External start button box, does not include fixtures | 2 sets |
4 | Fixture | Dedicated customization | 2 sets |
5 | Electrical cable | Power cord, welding power ground cord, external conversion box, trachea, etc. | 1 set |
6 | Welding gun clearing station | Clean up the torch, fuel injection, cut the wire （3 in 1） Chinese brand | 1 set |
7 | Conductive tip | Φ=0.8mm or Φ=1.0mm ;1 row = 10 pieces | 10 row |
8 | Welding torch cover | 350A Air-cooled welding torch ;1 row = 5 pieces | 10 row |
Custom machine requirements
1. Workpiece data
Carbon steel products：
2. Welding robot workstation workflow
(1) First, fix the product to be welded on the platform of the A station, and then fix it with a special fixing fixture. This ensures reproducible installation of the product, prevents the workpiece from falling off during the welding process and avoids welding distortion in certain areas.
(2) Obtain the required machining program in the robot welding control
(3) Press the start button of the A station positioner, and then the welding robot automatically performs the position welding required for the A station workpiece. At this point, the operator can install the product on the platform of the B station, the installation is completed, and then press the start button of the robot B station.
(4) After waiting for the welding of station A, the robot will automatically carry out the welding of the B station product (in the previous step, the operator retained the start button of the B station), at this time the operator manually removed the product of the A station. Repeat the installation again.
(5) Repeat the above steps
3. Workpiece precision requirement：
（1）The surface of the work shall not affect the quality of welding oil, rust, moisture；
（2）Must not affect the positioning of burrs, etc.；
（3）The clearance shall be no more than 1mm；
（4）The consistency error of the same weld group is less than 0.5m.
4. Applications
The workstation is mainly composed of 6-axis welding robot, robot controller, Servo head and tail positioner, Panasonic YD-350GL5 welding power supply, welding gun cleaning station, carbon dioxide gas cylinder, external start button box .
2. Numerical control welding robot workstation layout:
Picture for reference only
1、6 Axis Welding Robot（KLTW1400）;2、Welding power supply (Panasonic YD-350GL5)
3、Robot control cabinet and teach pendant（TRC3C-B06）;4、Servo head and tail positioner; 5、Welding gun cleaning station; 6、External start button box;
7、Carbon dioxide gas cylinder; 8、Fixture
